TTR Cargo including TTR 5200 Adsorption Dryer

Product number KIT0002524
Delivery status: Currently not available
TTR Cargo including TTR 5200 adsorption dryer
The TTR Cargo is a ready-to-go all-weather trailer solution for mobile drying applications with high capacities, for example in the case of drying large new buildings, renovation sites or as a fast, temporary replacement for faulty stationary equipment.

For this purpose, the free standing box trailer in tandem version is equipped with a transport-proof built-in adsorption drying unit - ready for the hose connection.

Depending on the capacity requirement, the TTR Cargo is available in combination with the adsorption drying units TTR 5200, 6600 or 8200.

Combined with the TTR 5200 adsorption dryer, a mobile solution with up to 5,800 m³/h of dry air and a dehumidifying capacity of up to 698 liters per day is available.

Equipment details TTR Cargo:

  • Robust and easy-to-clean construction with hot-galvanized chassis, forklift pockets, support wheel and two support feet
  • All controls quickly accessible behind lockable front flap
  • Additional storage compartment for accessories such as air transport hoses, etc.
  • All service flaps are equipped with gas springs
  • Easily accessible aluminium roller shutter with lock
  • Integrated lifting module for easy removal of the adsorption drying unit for service work, etc.
  • Box chassis can be completely removed from the trailer if required

Technical details:

  • Combineable adsorption drying units: TTR 5200, TTR 6600, TTR 8200
  • Performance data: depending on the combined TTR model, see technical data TTR 5200, 6600 or 8200
  • Dimensions (L x W x H): 4.400 x 2.100 x 2.900 mm
  • Tensile weight: 1,950 kg (including drying unit)


TTR 5200 Adsorption Dryer

Due to inegrated heat recovery, and the electric energy management rank the TTR 5200 and the rest of the TTR-adsorption dehumidifiers among the most efficient of their kind!

Because of the robust housing and the technology, following highest industrial standards even under rough conditions the TTR 5200 is a reliable dehumidifier.

Benefits in practice:

  • Professional quality „made in Germany"
  • High dehumidification performance even at low temperatures
  • Reliable silicagel sorption rotors in a washable and mechanically high-tensile design
  • Integrated heat recycling process
  • Electrical regeneration heaters

Standard equipment characteristics of TTR 5200 at a glance:

  • Steel housing, galvanized and painted
  • Produced with condiseration of weather protection
  • Wide range power supply
  • Contol of rotor turning (rotor and motor)
  • Overheat safety system with restart lock-out (regenaration air)
  • Management of operating temperature
  • Filter control (air flow and collect warning lights )
  • Duoventic-control*
  • Configurable change of direction of the air stream (conversion with little effort)
  • Connecting terminals external on/off
  • Hygrostat with connecting terminals
  • Floating contacts (operation, disruption, filter)

Technical data of theTTR 5200:

  • Dehumidification performance: 29,1 kg/h
  • Dry air flow rate: 5.800 m³/h bei 400 Pa
  • Electrical connection: 3x 400 V / 50 Hz
  • Heater of regenerated air: 36 kW
  • Power consumption max..: 40 kW
  • Dimensions LxWxH: 1.750 x 1.100 x 1.700 mm
  • Weight: 680 kg
  • Connections dry air inlet/outlet Ø: 500 / 500 mm
  • Connections regenerated air inlet/outlet Ø: 300 / 300 mm

Possible additional options:

  • Flowmatic
  • Humidity and temperature control
  • Dew point sensor -80 °C ... +20 °C
  • Touchscreen for control of the device
  • Remote connection GSM
  • Remote connection WLAN
  • Heat exchanger module
  • Electric reheater for dry air
  • External Hygrostat HG 120
  • External Hygrostat HG 125
  • Transportframe (stackable), with wheels

*Due to Duoventic the performance of each fan is independently adjustable by means of potentiometer, also the dampers are not needed

Technical data
General information
  Article number
Dry air (in case of intake air 20°C / 60 % RH)
  Dehumidification [kg/24h] 698.4
  Dehumidification [kg/h] 29.1
  Air volume free-blowing [m³/h] 5,800
  Nominal air volume [m³/h] 5,200
  External compression [Pa] 400
  Connection inlet Ø [mm] 500
  Connection outlet Ø [mm] 500
Regeneration air
  Nominal air volume [m³/h] 1,050
  External compression [Pa] 300
  Connection inlet Ø [mm] 300
  Connection outlet Ø [mm] 300
Operating principle
  Operating principle TTR Trisorp Dual
Operating range
  Min. temperature [°C] -20
  Max. temperature [°C] 40
  Min. humidity [% RH] 0
  Max. humidity [% RH (non-condensing)] 100
Electrical values
  Mains connection 380 - 480 V/50 - 60 Hz
  Nominal current consumption [A] 60
  Installed capacity [kW] 40
  Heating capacity [kW] 36
  Recommended fusing [A] 63
Electric connection
  Terminal connection
Automatic dehumidification
  Non-stop dehumidification
  Length (packaging excluded) [mm] 1,919
  Width (packaging excluded) [mm] 1,110
  Height (packaging excluded) [mm] 1,680
  (packaging excluded) [kg] 680
Equipment, features and functions
Housing type
  Steel housing, galvanized and painted
  Metal plastic composite housing
  Powder coating
  Stainless steel
Device version
  Indoor installation (standard)
  Shelter against the weather
  Hiring model
  Wide-range voltage
  Rotor rotation control (rotor and drive)
  Overtemperature protection system with restart lock (regeneration air)
  Operating temperature management (regeneration air)
  Filter monitoring (per air current and collective warning light)
  Duoventic control
  Configurable air direction reversal (conversion requires minimal effort)
  Terminals for external ON/OFF
  Terminals hygrostat
  Potential-free contacts (operation, fault, filter)
  Operating hours counter
  Air volume regulation
  Integrated heat recovery
  Sensor-supported Flowmatic control
  Hygrostat (electronic)
  Hygrostat (mechanical)
  Moisture control
  Moisture and temperature registration
  Power meter
  DIN socket for external ON/OFF
Regeneration heating design
  Electric resistance
  Electric PTC
  Saturated vapour (4 bar)
Air pre- and post-treatment
  Carry/transport handle(s)
  Non-marking rubber wheels
  Stacking device
  Non-marking rubber feet
  Transport frame
  Swivel casters with brake
  Trestle rollers
  Crane lifting gear
  Forklift pockets

 standard equipment

 optionally available

 not available

Technical data
General information
  Article number
  Axles 2
  Max. additional load with built-in dryer [kg] 100
  Maximum speed in [km/h] 100
  Length Including superstructure [mm] 4,400
  Width Including superstructure [mm] 2,100
  Height Including superstructure [mm] 2,900
  Without superstructure [kg] 600
  Superstructure [kg] 630
  Including superstructure [kg] 1,230
  Max. additional load dryer [kg] 750
  (incl. industrial desiccant dehumidifier) [kg] 1,950

 standard equipment

 optionally available

 not available



0 0800 80908090

Mon - Thu: 8:00am – 5:30pm

Friday: 8:00am - 5:00pm (CET)