TTR 5200 Desiccant Dehumidifier

Product number 1110000182
TTR 5200 Desiccant Dehumidifier

This dehumidifier works according to the adsorption principle. This not only allows a reliable and high dehumidification performance even at low suction temperatures, but it also enables to achieve lower dew points than condensation dehumidifiers.

Due to inegrated heat recovery, and the electric energy management rank the TTR 5200 and the rest of the TTR-adsorption dehumidifiers among the most efficient of their kind!

Because of the robust housing and the technology, following highest industrial standards even under rough conditions the TTR 5200 is a reliable dehumidifier.

Benefits in practice:

  • Professional quality „made in Germany"
  • High dehumidification performance even at low temperatures
  • Reliable silicagel sorption rotors in a washable and mechanically high-tensile design
  • Integrated heat recycling process
  • Electrical regeneration heaters


Standard equipment characteristics of TTR 5200 at a glance:

  • Steel housing, galvanized and painted
  • Produced with condiseration of weather protection
  • Wide range power supply
  • Contol of rotor turning (rotor and motor)
  • Overheat safety system with restart lock-out (regenaration air)
  • Management of operating temperature
  • Filter control (air flow and collect warning lights )
  • Duoventic-control*
  • Configurable change of direction of the air stream (conversion with little effort)
  • Connecting terminals external on/off
  • Hygrostat with connecting terminals
  • Floating contacts (operation, disruption, filter)


Technical data of theTTR 5200:

  • Dehumidification performance: 29,1 kg/h
  • Dry air flow rate: 5.800 m³/h bei 400 Pa
  • Electrical connection: 3x 400 V / 50 Hz
  • Heater of regenerated air: 36 kW
  • Power consumption max..: 40 kW
  • Dimensions LxWxH: 1.750 x 1.100 x 1.700 mm
  • Weight: 680 kg
  • Connections dry air inlet/outlet Ø: 500 / 500 mm
  • Connections regenerated air inlet/outlet Ø: 300 / 300 mm


Possible additional options:

  • Control module Millenium
  • Flowmatic S
  • Flowmatic M
  • Humidity and temperature control
  • Dew point sensor -80 °C ... +20 °C
  • Touchscreen for control of the device
  • Remote connection GSM
  • Remote connection WLAN
  • Heat exchanger module
  • Electric reheater for dry air
  • External Hygrostat HG 120
  • External Hygrostat HG 125
  • Transportframe (stackable), with wheels


*Per Duoventic is the performance of each fan independently adjustable by means of potentiometer, also the dampers are not needed

Technical data
General information
  Article number 1.110.000.182
Dry air (in case of intake air 20°C / 60 % RH)
  Dehumidification [kg/24h] 698.4
  Dehumidification [kg/h] 29.1
  Air volume free-blowing [m³/h] 5,800
  Nominal air volume [m³/h] 5,200
  External compression [Pa] 400
  Connection inlet Ø [mm] 500
  Connection outlet Ø [mm] 500
Regeneration air
  Nominal air volume [m³/h] 1,050
  External compression [Pa] 300
  Connection inlet Ø [mm] 300
  Connection outlet Ø [mm] 300
Operating principle
  Operating principle TTR Trisorp Dual
Operating range
  Min. temperature [°C] -20
  Max. temperature [°C] 40
  Min. humidity [% RH] 0
  Max. humidity [% RH (non-condensing)] 100
Electrical values
  Mains connection 380 - 480 V/50 - 60 Hz
  Nominal current consumption [A] 60
  Installed capacity [kW] 40
  Heating capacity [kW] 36
  Recommended fusing [A] 63
Electric connection
  Terminal connection
Automatic dehumidification
  Non-stop dehumidification
Dimensions
  Length (packaging excluded) [mm] 1,919
  Width (packaging excluded) [mm] 1,110
  Height (packaging excluded) [mm] 1,680
Weight
  (packaging excluded) [kg] 680
Equipment, features and functions
Housing type
  Steel housing, galvanized and painted
  Plastic
  Metal plastic composite housing
  Powder coating
  Stainless steel
Device version
  Indoor installation (standard)
  Shelter against the weather
  Hiring model
  Stackable
Equipment
  Wide-range voltage
  Rotor rotation control (rotor and drive)
  Overtemperature protection system with restart lock (regeneration air)
  Operating temperature management (regeneration air)
  Filter monitoring (per air current and collective warning light)
  Duoventic control
  Configurable air direction reversal (conversion requires minimal effort)
  Terminals for external ON/OFF
  Terminals hygrostat
  Potential-free contacts (operation, fault, filter)
  Operating hours counter
  Air volume regulation
  Integrated heat recovery
  Sensor-supported Flowmatic control
  Hygrostat (electronic)
  Hygrostat (mechanical)
  Moisture control
  Moisture and temperature registration
  Power meter
  Ammeter
  DIN socket for external ON/OFF
Regeneration heating design
  Electric resistance
  Electric PTC
  Saturated vapour (4 bar)
  Gas
Air pre- and post-treatment
  Pre-cooling
  After-cooling
Mobility
  Carry/transport handle(s)
  Non-marking rubber wheels
  Stacking device
  Non-marking rubber feet
  Transport frame
  Swivel casters with brake
  Trestle rollers
  Crane lifting gear
  Forklift pockets

 standard equipment

 optionally available

 not available

 

Hotline:

0 0800 80908090

Mon - Thu: 8:00am – 5:30pm

Friday: 8:00am - 5:00pm (CET)

E-Mail:

online-uk@trotec.com