TDS 10 Electric Fan Heater

Product number 1410000012
You save: 54 %
£49.19 £22.34 incl. VAT

show net price

TDS 10 Electric Fan Heater

The TDS 10 electric heater provides stages a heating performance between 0.65 kW and 2 kW in 3 stages at an emitted air volume of 186 m³/h. Furthermore the TDS 10 has an integrated thermostat and an integrated connection cable.
In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series don't consume oxygen and produce combustion gases. Because of that this devices can be used everywhere, especially for temperature controls unheated interiors.

The possibility of wall mounting or installation under the ceiling opens a wide range of applications, e.g. for heating of building container, marketplaces, greenhouses, small storages, garages, workshops, boathouses or at installation applications.

Thanks to the integrated thermostat control, the produced warm air flow can be adjusted continuously to the desired temperature at all TDS models.

The thermostat controlled heating elements of the TDS 10 switch on the permanent fan, if needed.

Benefits in pratice:

  • 100% TROTEC - development, design, production
  • Multistage temperature control with up to 3 heating stages
  • Integrated room thermostat for constant, cosy warmth
  • Overheat protection
  • Fan motor with thermal protection
  • Condensation-free heating - no oxygen consumption - because of that the TDS 10 is suitable for uses in enclosed rooms
  • Wall and ceiling bracket available - mounting is available as an accessory

Fields of application:

  • Building container
  • Garages
  • Gastronomy
  • Greenhouses
  • Marketplaces
  • Storerooms and workshops
  • Boathouses
  • Workshops
  • Shipbuilding
  • and many more...

Technical data:

  • Heating performance stage 1: 0.65 kW
  • Heating performance stage 2: 1.3 kW
  • Heating performance stage 3: 2 kW (max. 1,720 kcal)
  • Air flow rate: 186 m³/h
  • Fan stages: 1
  • Power: 8.7 A
  • Mains voltage: 230 V / 50 Hz
  • Power connector: Schuko-plug / CEE 7/7
  • Connection cable: integrated (length 1.4m)
  • Thermostat: integrated
  • Mobility: portable
  • Noise level: 46 dB (A)
  • Overheat protect: existing
  • Protection type: IPX4
  • Length: 198 mm
  • Width: 210 mm
  • Height: 320 mm
  • Weight: 3.7 kg

Information: At the back of the electric heaters (cold) air is being sucked in, heated up and exhausted as warmed air again. Thereby, the room temperature increases constantly over time. Because very much air is being transported the exhausted air doesn't feel very hot! Due to the high air flow rate the whole room is warmed up gradually.
Technical data
General information
  Article number 1.410.000.012
Heating capacity
  Stage 1 [kW] 0.65
  Stage 2 [kW] 1.3
  Stage 3 [kW] 2
  Stage 4 [kW]
  Stage Max. [kcal] 1,720
Amount of air
  Stage Max. [m³/h] 186
Temperature increase
  in [°C] 95
Operating range
  Min. temperature [°C] -20
  Max. temperature [°C] 40
  Number of fan stages 1
Electrical values
  Mains connection 230 V/50 Hz
  Nominal current consumption [A] 8.7
  Recommended fusing [A] 16
  Power input [kW] 2
Electric connection
  Connection plug CEE 7/7
  Provided by the customer
  Cable length [m] 1.35
Sound values
  Distance 1 m [dB(A)] 46
Hose connector
  Hose connection
  Length (packaging excluded) [mm] 210
  Width (packaging excluded) [mm] 195
  Height (packaging excluded) [mm] 310
  (packaging excluded) [kg] 3.5
Equipment, features and functions
  Carry/transport handle(s)
  Plastic wheels
  Rubber-tyred metal wheels
  Non-marking full-rubber wheels

 standard equipment

 optionally available

 not available



0 0800 80908090

Mon - Thu: 8:00am – 5:30pm

Friday: 8:00am - 5:00pm (CET)