T660 Moisture Meter

Product number 3510207650
£190.43 incl. VAT

show net price

T660 Moisture Meter

The T660 is a professional hand-held measuring device for non-destructive determination of moisture distribution in areas up to a depth of 4 cm from the surface.
As a quality instrument that is "made in Germany" the T660 is impressive in terms of its digital precision without the disadvantage of drift in measured values exhibited by comparable analogue instruments. Due to its permanent real time displaying of the measured value on the easy-to-read display, you can determine damp and dry wall or floor areas rapidly. In addition, the device is suitable for preliminary inspection of the maturity of building materials in CM measurements.

For an immediate evaluation of the measured data, minimum, maximum and average functions are available. In addition the current measured value can be retained by means of the hold function. Since the instrument's screen can display two values, for purposes of results evaluation a function value can be displayed at the same time as the current measured value if required.

You can connect the T660 moisture meter to a PC with a USB cable. With the MultiMeasure Studio Software (free in the service / download section of uk.trotec.com) the measured values of the T660 can be transferred online and in real time to the PC. In this way, the values are saved for later analysis or reports.

With the online-memory function, you can perform raster measurements on the computer, e.g. at the building moisture measurement of a tested cellar wall.

A particularly practical advantage is the alarm function:

Here an individual limit value is entered into the unit before any measurements are taken. In this way, large wall or floor areas can be measured quickly and effectively. The user can concentrate on the object being measured without having to look constantly at the measurement results on the display. As soon as the pre-defined alarm limit value is exceeded an acoustic warning signal sounds automatically!

A few practical benefits:

  • Measuring device designed and produced according to the highest quality standards in Germany
  • German industrial design in robust, premium two-component construction with IP54 type of protection
  • Continuous easy-to-clean glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measured values even in the sunlight
  • Capacitive touchscreen control panel
  • High-resolution colour display for simultaneous indication of two measured values
  • For the quick and non-destructive determination of near-surface moisture distributions to up to 4 cm
  • Moisture alarm function
  • Material pre-selection for anhydrite and cementitious screed
  • Direct display of measured values possible in mass % or CM %
  • Grid measurement function via USB with active software connection
  • Incl. MultiMeasure Studio measurement data management software (standard download version)

Technical data:

  • Material moisture measuring: depth moisture
  • Measuring principle: microwave method
  • Measuring range: 0 to 200 digits
  • Resolution: 0.1 digits
  • Penetration depth: up to 40 mm
  • Alarm signal: acoustic
  • Upper menu options: MAX, MIN, HOLD, AVG, ACT
  • Lower menu options: LIGHT, ALARM, CAL
  • Technical data
    General information
      Article number 3.510.207.650
    Wood moisture [%]
      Min. measuring range [%]
      Max. measuring range [%]
      Resolution [%]
      Accuracy [%]
      Min. temperature compensation [%]
      Max. temperature compensation [%]
      Measuring principle
    Material moisture [%]
      Min. measuring range [%]
      Max. measuring range [%]
      Accuracy [%]
      Resolution [%]
      Measuring principle Capacitive
      Min. measuring range [%] 0
      Max. measuring range [%] 7.6
      Accuracy [%] ± ±0.1 %
    Material moisture [digits]
      Min. measuring range [Digit] 1
      Max. measuring range [Digit] 200
      Accuracy 0.1
      Resolution [Digit] 0.1
      Measuring principle Capacitive
      Max. penetration depth (non-destructive) [mm] 40
    Device control
      Touch key display
      Push buttons
    Housing design
    Power supply
      Internal (battery) 4 x 1.5V, AA
    Surrounding conditions
      Operation - min. temperature [°C] 0
      Operation - max. temperature [°C] 50
      Operation – min. relative humidity [% r.F.]
      Operation - max. relative humidity [% RH] 95
      Length (packaging excluded) [mm] 209
      Width (packaging excluded) [mm] 63
      Height (packaging excluded) [mm] 35
      (packaging excluded) [kg] 0.285
    Standard scope of delivery
    Standard scope of delivery
      Measuring device
      Factory test certificate
      Operating manual
      Protective cap
      Electrode tips (1.5 x 20 mm)
      Electrode tips (2.2 x 8 mm)
      2x union nuts
      Wood type directory
    Ascertainable measured values and functions
    Internal sensors
      Material moisture [digits]
      Material moisture [%]
      Wood moisture [%]
    Functions and features
      Maximum value display
      Minimum value display
      Hold function
      Acoustic alarm function
      Automatic functional test
      Automatic battery test
      Display illumination
      Automatic switch-off
      Non-destructive measurement method
      Selection sensor characteristic map (sens)
      Unit 2
      Selection of wood material characteristics (Mat)
      Temperature compensation
      Manual temperature setting
      Mode selection slide control
      Retaining clip

     standard equipment

     optionally available

     not available



0 0800 80908090

Mon - Thu: 8:00am – 5:30pm

Friday: 8:00am - 5:00pm (CET)